iPhone 11 Pro Pentalobe Screws Replacement
This document provides instructions for detaching or substituting the two screws that fasten the iPhone 11 Pro display assembly.These fasteners represent the sole external screws present on the device's exterior.Due to Apple's proprietary design, these screws feature a five-point configuration necessitating a specialized P2 pentalobe driver for successful extraction.
Step 1 | Remove the pentalobe screws
Prior to commencing the repair process, several preparatory steps are essential.
- A fully charged lithium-ion battery presents a fire or explosion hazard if damaged; therefore, ensure the battery's charge level is below 25% before starting.
- Deactivate the iPhone's power supply to prevent electrical hazards during the disassembly procedure.
- Utilize a screwdriver to extract the pair of pentalobe fasteners, each measuring 6.7 mm in length, located along the iPhone's lower edge.
- Separating the display assembly will irreversibly damage the iPhone's water resistance; either acquire replacement sealing components beforehand or exercise extreme caution to prevent moisture ingress during reassembly if new seals are not used.