iPhone 11 Pro Rear Case Replacement
Employ this document as a resource for the complete disassembly of rear case elements from your iPhone 11 Pro.Detailed procedures are provided to facilitate the removal of the speaker assembly, connecting wires, taptic engine, power cell, main circuit board, and button protective covers, enabling replacement of damaged rear covers.This process allows for the correction of cosmetic issues such as dents or bends on the rear case.
Step 1 | Remove the pentalobe screws
Prior to commencing the repair process, ensure you take preparatory steps.
- To mitigate potential hazards, ensure the iPhone's battery level is reduced to less than 25% capacity.A fully charged lithium-ion battery presents a fire or explosion risk if it sustains physical damage like a puncture.Deactivate the iPhone's power supply to prevent electrical shorts during the disassembly procedure.
- Utilize a screwdriver to extract the pair of 6.7 mm pentalobe fasteners located along the iPhone’s lower edge.
- Separating the display assembly from the iPhone’s body will damage the integrated waterproofing, necessitating replacement seals or meticulous avoidance of moisture.
- Should you choose not to replace the seals, exercise extreme caution to prevent liquid ingress during reassembly to maintain some level of water resistance.