iPhone 14 Plus Pentalobe Screw Replacement
Employ this document as a resource for the disassembly or substitution of the pair of fasteners that hold the iPhone 14 Plus display and back glass in place.
The creation of this instructional material was based on the specifications of the A2886 model, which is utilized for international markets.
- The Pentalobe screws, characterized by their five-point configuration, represent a unique Apple design, necessitating a dedicated P2 screwdriver for manipulation.Specialized tools, specifically a P2 screwdriver, are essential for working with the Pentalobe (five-point) screws due to their proprietary Apple design.
Step 1 | Remove the pentalobe screws
Commence the repair process by completely deactivating the iPhone's power supply.Disassembly operations should not proceed until the device is fully powered down.
- The task necessitates no specialized implements or instruments.No tools are necessary to perform this initial stage of the repair.
- Utilize a screwdriver to extract the pair of pentalobe P2 screws, each measuring 6.8 mm in length, located along the iPhone's lower border.Carefully unscrew and retain the two 6.8 mm pentalobe screws securing the bottom edge of the iPhone.