iPhone 14 Pro Pentalobe Screw Replacement

Employ this document as a resource for the disassembly or substitution of the two fasteners that hold the iPhone 14 Pro display assembly in place.

The creation of this instructional material was based on the specifications of the A2890 model, intended for international markets.

The screws utilized are of a distinctive Apple design, employing a Pentalobe (five-point) configuration, necessitating a specialized P2 screwdriver for removal or installation.Successful manipulation of these screws demands the application of a specialized P2 screwdriver, due to their unique Pentalobe (five-point) profile.

Step 1 | Remove the pentalobe screws

Commence the repair process by completely deactivating the iPhone's power supply.Disassembly operations should not proceed until the device is fully powered down.

No specialized implements are necessary to perform this initial stage.The task requires no tools for the first step.
Utilize a screwdriver to extract the pair of pentalobe screws, each measuring 6.8 mm in length, located along the iPhone's lower perimeter.Carefully unscrew and remove the two screws with a length of 6.8 mm, which are pentalobe type, situated at the base of the iPhone.