iPhone 4 Verizon Rear Panel Replacement
Detach the iPhone 4’s back cover to gain access to its internal components.
Step 1 | Rear Panel
To start, ensure the iPhone's battery is depleted to less than 25% capacity; a fully charged lithium-ion battery presents a fire or explosion hazard if damaged.
To prevent electrical shock or damage, ensure the iPhone is completely de-energized prior to starting the repair process.
To detach the back casing, examine it for either two #000 Phillips head screws or Apple's proprietary 5-Point "Pentalobe" screws; confirm you possess the matching screwdriver for successful removal.
Using either a Pentalobe driver or a Phillips #000 screwdriver, detach the two screws measuring 3.6 mm located adjacent to the dock connector.
To prevent electrical shock or damage, ensure the iPhone is completely de-energized prior to starting the repair process.
To detach the back casing, examine it for either two #000 Phillips head screws or Apple's proprietary 5-Point "Pentalobe" screws; confirm you possess the matching screwdriver for successful removal.
Using either a Pentalobe driver or a Phillips #000 screwdriver, detach the two screws measuring 3.6 mm located adjacent to the dock connector.
Step 2
Applying pressure, slide the rear panel upwards against the iPhone's upper edge.
Expect a displacement of approximately 2 millimeters.
Expect a displacement of approximately 2 millimeters.
Step 3
To release the rear panel, either gently raise it by applying pressure with your fingers or secure a Small Suction Cup to the panel and lift.
Exercise caution to prevent harm to the plastic clips affixed to the rear panel.
Exercise caution to prevent harm to the plastic clips affixed to the rear panel.