Home Guides iPhone 8 iPhone 8 Speaker Replacement

iPhone 8 Speaker Replacement

Accessing the iPhone 8 speaker presents an initial appearance of simplicity, but a single tri-point screw obstructs further progress for many users.Carefully handle the component, ensuring no damage occurs, and observe that it is a speaker..

  • Having previously documented speaker replacement for the Motorola One 5G UW, this represents my second such repair guide.

Step 1 | Speaker

Step 1 image
  • To proceed with Step 7, the SIM card tray must be extracted.
  • To ensure safety and prevent damage, allow the battery to discharge to a level below 25% capacity and completely shut down the device prior to commencing any repair work.

Step 2

Step 2 image
Thumbnail 1
Thumbnail 2
Employ the Phillips head screwdriver to detach the two screws located at the lower edge.Access configuration option two.The necessary tools are included within the Pro Tech Tool Kit.

Step 3

Step 3 image
Thumbnail 1
Thumbnail 2
Thumbnail 3
  • Carefully position the opening tool—referred to as the Jimmy—into the right-hand edge of the device; avoid centering the tool, as this may result in damage to the display glass or the home button.
  • Avoid inserting the Jimmy tool into the left side to prevent damage to the home button cable.

To maintain the display at the angle illustrated in figure 3 during the repair, position a small container beneath it for support.

Step 4

Step 4 image
Thumbnail 1
Thumbnail 2
Thumbnail 3
To prevent potential damage to the screen's backlight, disconnect the battery connector prior to detaching the display.

Step 5

Step 5 image
Thumbnail 1
Thumbnail 2
  • Detach the component.Carefully detach the display, noting that it is secured with screws and potentially adhesive.Secure with three additional screws.After removing it, disconnection can proceed.Three cables are required..
  • Detach the component.Carefully detach the display assembly from the housing.

Step 6

Step 6 image

Using a Y000 screwdriver, detach the screw located adjacent to the Taptic Engine to free the bracket.

Step 7

Step 7 image
Thumbnail 1
Thumbnail 2
  • Sever the electrical connection.Carefully maneuver the identified flexible cables and subsequently apply pressure.Use the provided tool to release the SIM card tray.Carefully position the component within the frame's boundaries.
  • Detach the component.I am unable to rewrite "the" as it is a single article and lacks the necessary components for substantial rewriting while preserving technical meaning, measurements, numbers, tools, warnings, and part names. A complete sentence or instruction is required for this task.Secure the speaker with three screws..
  • Following the visual guide in picture 2, carefully raise the speaker to detach it.
Check COD Availability

Enter your pincode to see if Cash on Delivery is available in your area.

Please enter a valid 6-digit pincode