Home Guides iPhone SE (1st Generation) How to 'repair' iPhone SE Lightning Connector

How to 'repair' iPhone SE Lightning Connector

Prior to immediately acquiring a replacement for youriPhone SE Lightning Connector, consider this straightforward cleaning procedure.

  • My iPhone SE Lightning Connector had previously undergone repair under warranty on three separate occasions, indicating it had not been substituted.Lightning Connector, it became apparent that the device's enclosure had not been breached during the purported repair.

Regrettably, the "replacement"Lightning Connector proved to be non-functional; however, with no other alternatives, I attempted a repair, which ultimately restored its operation.

Step 1 | Tweezer Time

Step 1 image
Initially, proceed with the following action:Employing delicate fine-tipped tweezers, meticulously extract accumulated lint and extraneous material from within the Lightning Connector's internal structure; a surprising quantity of such material is often present.

Step 2 | Contact Cleaner Time

Step 2 image
Phase two commences:Following the internal cleaning of the Lightning Connector, meticulously dispense contact cleaner. To prevent overspray onto other components, masking the remainder of the device is a prudent precaution. Because the Lightning Connector had already been detached from the device in my instance, this particular concern was avoided.
  • For optimal ventilation and to mitigate the strong odor, performing this procedure outdoors is highly recommended.

Step 3 | Put the kettle on and make a cuppa

Step 3 image
Proceeding to the next stage, once the contact cleaner has completely evaporated.After the contact cleaner has fully dried, the process is complete.
Check COD Availability

Enter your pincode to see if Cash on Delivery is available in your area.

Please enter a valid 6-digit pincode