iPhone XR Pentalobe Screws Replacement
This document provides instructions for detaching or substituting the two screws that hold the iPhone XR display assembly in place.These fasteners represent the sole external screws present on the iPhone device.Apple employs a distinctive five-point head design for these screws, necessitating the use of a specialized P2 pentalobe driver for their extraction.Successful removal demands the application of the correct tool to avoid damage to the screw heads or surrounding components.The unique screw head geometry prevents the use of standard screwdrivers, emphasizing the importance of using the provided P2 pentalobe driver.
Step 1 | Remove the pentalobe screws
Prior to commencing the repair process, it is essential to prepare the device.
- To mitigate the risk of fire or explosion, ensure the iPhone's lithium-ion battery is discharged to a level below 25%; a fully charged battery poses a significant hazard if damaged.
- Deactivate the iPhone's power supply before commencing the disassembly procedure.
- Utilize a screwdriver to extract the pair of 6.7 mm pentalobe fasteners located along the iPhone's lower edge.
- The iPhone's inherent water resistance will be lost upon opening; therefore, prepare replacement seals beforehand or exercise extreme caution to prevent liquid ingress if the seals are not replaced during reassembly.
- Each pentalobe screw incorporates a small black rubber gasket situated directly beneath the screw head; inspect these gaskets for wear or damage and consider replacing the screws to maintain optimal dust and water protection.